Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
hw:rme_fireface_ucx [2020/07/14 09:43]
magdesign [Software]
hw:rme_fireface_ucx [2020/07/19 16:42] (current)
magdesign [Software]
Line 3: Line 3:
 ===== General ===== ===== General =====
  
-The [[http://​www.rme-audio.de/​en_products_fireface_ucx.php|RME Fireface UCX]] is a professional interface with 18 i/o channel (8 analog, 2 mic preamps), MIDI, S/PDIF and ADAT. It has both Firewire (400) and USB 2.0 (class compliant). ​Their site actually lists Linux as a supported ​OS!+The [[http://​www.rme-audio.de/​en_products_fireface_ucx.php|RME Fireface UCX]] is a professional interface with 18 i/o channel (8 analog, 2 mic preamps), MIDI, S/PDIF and ADAT. It has both Firewire (400) and USB 2.0 (class compliant). ​ 
 + 
 +Its not officially ​supported ​under Linux but works with Ubuntu-Studio.
  
 ===== Software ===== ===== Software =====
  
-In CC (Class Compliant) mode the RME Fireface UCX works out of the box without having to use a patched kernel or flashing some firmware (tested ​in USB).+In CC (Class Compliant) mode the RME Fireface UCX works out of the box without having to use a patched kernel or flashing some firmware (tested ​with USB connection in Ubuntu 18.04 LTS).
  
-ALSA will see only one channel, but after installing QJackCtl from Ubuntu-Studio installer everything works.+ALSA will see only one channel, but after installing QJackCtl from [[https://​ubuntustudio.org/​ubuntu-studio-installer/​| ​Ubuntu-Studio installer]] everything works with Jackaudio (QJackCTL).
  
 Listed audio channels in Jack correspond to:  Listed audio channels in Jack correspond to: 
Line 19: Line 21:
  
  
-CH 11 -18 => Adat/Tosink+CH 11 -18 => Adat (Tosink)
  
  
 You might run some pre-start and post-start scripts from QJackCtl to get rid of some pulseaudio standard routings to the first 2 channels. You might run some pre-start and post-start scripts from QJackCtl to get rid of some pulseaudio standard routings to the first 2 channels.
  
-See here: https://​wiki.archlinux.org/​index.php/​JACK_Audio_Connection_Kit+[[ https://​wiki.archlinux.org/​index.php/​JACK_Audio_Connection_Kit ​| see here.]] 
 +Get working scripts [[ https://​github.com/​magdesign/​PocketVJpro/​tree/​master/​scripts/​jackscripts | here.]]
  
 We figured out that custom routings are only loaded when QJackCtl is started from GUI rater than activated from command line only. We figured out that custom routings are only loaded when QJackCtl is started from GUI rater than activated from command line only.
hw/rme_fireface_ucx.1594712624.txt.gz · Last modified: 2020/07/14 09:43 by magdesign