Differences

This shows you the differences between two versions of the page.

--- wiki:downloading_and_booting_kxstudio [2013/10/22 13:03] – Added Easy2Boot and USDC as alternatives to unetbootin danboid
+++ wiki:downloading_and_booting_kxstudio [2013/10/22 13:10] (current) – [Booting KXStudio] danboid
@@ Line 27: / Line 27: @@
 =====Booting KXStudio=====
-Reboot your machine with the KXStudio DVD in the drive or with the unetbootin modified USB drive attached. In rare cases, your computer will automatically boot KXStudio. Typically, however, you will need to find out how to enter the boot menu on your machine or enter the BIOS or UEFI menu to change the boot order so that the DVD and/or USB drive takes higher boot priority than the hard drive. Commonly, pressing F12 right at start up will bring up the boot options; pressing F2 will bring up the full BIOS menu. In other cases, DELETE or ESCAPE are used. If none of these work, refer to the manual for your computer or search online for machine-specific instructions.
+Reboot your machine with the KXStudio DVD in the drive or with the Easy2Boot/unetbootin/USDC-modified USB drive attached. In rare cases, your computer will automatically boot KXStudio. Typically, however, you will need to find out how to enter the boot menu on your machine or enter the BIOS or UEFI menu to change the boot order so that the DVD and/or USB drive takes higher boot priority than the hard drive. Commonly, pressing F11 or F12 right at start up will bring up the boot options; pressing F2 will bring up the full BIOS menu. In other cases, DELETE or ESCAPE are used. If none of these work, refer to the manual for your computer or search online for machine-specific instructions.
-If you boot the DVD, you will first be prompted to choose the language to use. When this occurs, you can either do nothing and wait 30 seconds before the default of English is chosen and booting continues or you can use the arrow keys and ENTER to choose an alternate language. Booting off the USB via unetbootin does not bring up the language selection menu directly; instead you may change language settings under 'System Settings'.
+If you boot the DVD, you will first be prompted to choose the language to use. When this occurs, you can either do nothing and wait 30 seconds before the default of English is chosen and booting continues or you can use the arrow keys and ENTER to choose an alternate language. Booting off USB does not bring up the language selection menu directly; instead you may change language settings under 'System Settings'.