Differences

This shows you the differences between two versions of the page.

--- wiki:intel_hda_realtime_howto [2012/01/13 03:12] – CpQfMzriXKrkEH 109.230.216.60
+++ wiki:intel_hda_realtime_howto [2014/03/09 00:28] (current) – j_e_f_f_g
@@ Line 1: / Line 1: @@
-The paragon of udnesrtadnnig these issues is right here!
+[[http://lists.linuxaudio.org/pipermail/linux-audio-user/2008-November/056243.html|Based on this mail on LAU by Nathanael Anderson]]
+~~META:title=Intel-HDA JACK low latency howto~~
+~~META:desc=How to get Intel-HDA cards working with low latency, in duplex operation~~
+====== Intel-HDA JACK low latency howto ======
+I've seen asked many times on the list how to get intel-hda cards working with low latency, in duplex operation. Here is a full, step by step, on how I got 4ms latency. I'm using a Dell M90 with a Quadro fx 1500, attached to a docking station with a Maudio Delta 66 pci card (secondary card) in it, the binary Nvidia drivers and Compiz. So if you were wondering, it is possible. :)
+===== Kernel =====
+(I'm not going to walk you through how to compile a kernel)
+the last kernel before the big kernel lock regression
+  wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.7.tar.bz2
+  tar xvjf linux-2.6.24.7.tar.bz2
+  cd linux-2.6.24.7.tar.bz2
+  wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.24.7-rt21.bz2
+if you don't see it here look in the [[http://www.kernel.org/pub/linux/kernel/projects/rt/older/|projects/rt/older/]] directory
+  bzcat ../patch-2.6.24.7-rt21.bz2
+Download this config: {{:wiki:config-intel-hda.txt}}
+  mv config-intel-hda.txt .config.old
+  make oldconfig
+build and install your kernel
+===== Module Options =====
+Add the following line to the file your distribution has its module options in
+(in ubuntu it is /etc/modules.d/alsa-base)
+  options snd-hda-intel model=ref position_fix=1 enable=1 index=0
+===== Mixer Options (VERY IMPORTANT ! ! !) =====
+enable capture/record elements in mixer
+**without this jack can't play nicely with intel-hda cards**
+===== RT Permissions =====
+In most modern distros /etc/security/limits.conf is where realtime permissions are set, I added these 3 lines to it, and added myself to the @audio group in /etc/group
+  @audio          -       memlock         1024000
+  @audio          -       nice            -10
+  @audio          -       rtprio          99
+===== Jack options =====
+I use qjackctl to set these
+  * put a check in Realtime
+  * Priority 89
+  * Frames/Period 64
+  * Sample Rate 48000
+  * Periods/Buffer 3
+===== Debian (9 sept 2013) =====
+  * Realtime does not have to be compiled anymore into the kernel: it is already by default. I know at least on "Debian 7.1 //Wheezy// amd64" & latest UbuntuStudio, perhaps more.
+  * On Debian the location of the config file is **/etc/modprobe.d/alsa-base.conf**
+  * Further config files are located at **~/.asoundrc** (userwide) and **/etc/asound.conf** (systemwide). Note that ~/.asoundrc works out as /home/CURRENTUSERNAME/.asoundrc so be aware that using ~ while being root (or su in a terminal) works out as /home/root/.asoundrc, which might not be what you want.
+  * The 'index=' setting seems to not work properly, and give errors during boot about //card not ready for slot// or something ( I will try to reproduce later). The solution is to not use the line with 'index=', but instead use '**options snd slots=snd-hda-intel**'. This will put snd-hda-intel in slot 0. If you have more cards, like me, you can sum them all up, 'options snd slots=snd-ca0106,snd-hda-intel' will assign my SB Audigy (ca0106) to slot 0, and my motherboard audio (hda-intel) to slot 1. You can also keep slot 0 'open', and only assign slot 1: 'options snd slots=,snd-hda-intel' will put the hda-intel in slot 1, keeping slot 0 open for any takers. Note the comma.
+  * The '**nice**' option is not needed, it is commented out on my setup.
+  * Example of /etc/asound.conf that will capture sound from device 0 on 'CA0106', and playbacks sound to device 1 on 'Intel':
+  Use '**aplay -l**' to list all playback devices, and '**arecord -l**' to list all capture devices. Results are like '//card 1: **Intel** [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]// ', where the part made bold is the name used. Case sensitive.
+  pcm.!default {                   # declare the default PCM device
+    type asym                      # combine playback and capture devices
+    playback.pcm {                 ### Playback object ###
+      type plug                    # convert audio to mixer format
+      slave.pcm {
+        type dmix                  # mix multiple audio streams
+        ipc_key 69569              # shared memory key; must be unique, just make one up
+        ipc_key_add_uid true       # add UID to shared mem key
+        ipc_perm 0600              # shared mem file permissions
+        slave {
+          pcm {
+            type hw                # define the playback hardware
+            card "Intel"           # YOUR playback card name
+            device 1               # YOUR playback device on that card
+          }
+          format S32_LE            # YOUR bits per sample format
+          rate 48000               # YOUR samples per second
+          channels 2               # number of audio channels
+        }
+      }
+    }
+    capture.pcm {                  ### Capture object ###
+      type plug                    # convert audio format from the hardware
+      slave {
+        pcm {
+          type hw                  # define the capture hardware
+          card "CA0106"            # YOUR capture card name
+          device 0                 # YOUR capture device on that card
+        }
+      }
+    }
+  }
+===== Comments =====
+Please comment here if this guide worked for you or what you had to do to get it working:
+!-- Comments end here --!
+{{tag>Sound_Cards_and_Drivers jack howtos_and_faqs hardware_linux}}