Differences

This shows you the differences between two versions of the page.

Link to this comparison view

wiki:scripts_and_tools [2011/06/30 17:57]
emrum
wiki:scripts_and_tools [2017/12/03 12:22] (current)
nilsge [Lisalo - Linux Sampler Loader]
Line 10: Line 10:
   * see here: [[/wiki/scripts_wav2specimen| wav2specimen ]]   * see here: [[/wiki/scripts_wav2specimen| wav2specimen ]]
  
-.+\\ 
 + 
 + 
 +==== lscp2rgd - linuxsampler to rosegarden instrument ==== 
 + 
 +  * see: [[/wiki/script_lscp2rgd]] 
 + 
 +\\ 
 + 
 +==== midi to hydrogen ==== 
 + 
 +  * [[/wiki/script_midi2hydrogen| convert drums of a midi file to hydrogen format ]] 
 + 
 +\\ 
 + 
 + 
 + 
 +==== SFZ (sound-bank-definition) to Hydrogen (drumkit xml-file) ==== 
 + 
 + 
 +  * [[/wiki/user/emrum/sfz_to_h2| sfz to hydrogen script ]] 
 + 
 + 
 +\\ 
 + 
 +==== script: create a hydrogen drumkit from wav files === 
 + 
 +thanks to Thijs van Severen 
 + 
 +[[http://audio-and-linux.blogspot.de/2012/04/hydrogen-drumkit-creator-script.html|  Hydrogen drumkit creator script ]] - note: filenames have to follow a rule 
 + 
 +\\ 
 + 
 +[[http://www.hydrogen-music.org/hcms/node/5#sect.pattern_editor.drumkit| Instrument mapping (Hydrogen Manual) ]] 
 + 
 +\\ 
 + 
 +[[http://www.mindwaremusic.com/SoundsetterHelp/scr/GMDrumMap.html| GM (general midi) mapping ]] 
 + 
 +\\ 
  
 ==== aj-snapshot - Store ALSA and JACK connections state ==== ==== aj-snapshot - Store ALSA and JACK connections state ====
Line 113: Line 153:
 . .
  
-=== convert sound files with libsndfile ===+==== convert sound files with libsndfile ====
  
-sndfile-convert+ 
 +=== convert all FLAC files in a directory to OGA format (vorbis-encoded stream in ogg-container) === 
 +\\ 
 +** Note: ** There is a simple and excellent GUI tool available for audio conversion: [[http://soundconverter.org/| SoundConverter ]] \\ 
 +It is included in the ubuntu repository. 
 +\\ 
 +\\ 
 +\\ 
 +<code bash> 
 +#!/bin/bash 
 + 
 +## UPDATE: sndfile-convert -vorbis  normalizes the sound to 0 DB ! 
 +## there are no options to control that, or compression rate. 
 +## so rather use "oggenc" instead ! 
 +## there is also a py-script called "dir2ogg" in ubuntu 
 + 
 +# initial code by Emanuel Rumpf 2012-04 
 +# any re-use and modification permitted 
 + 
 +# convert all FLAC files in a directory to OGA format  
 +# (compressed, vorbis-encoded stream in ogg-container) 
 +
 +# USAGE: 
 +# first install libsndfile - in ubuntu: 
 +# sudo   apt-get install   libsndfile1 sndfile-programs sndfile-tools 
 +#  
 +# copy this script to the files directory, make it executable 
 +# edit config options below if necessary, run it 
 + 
 +# TODO: allow file-names with spaces 
 + 
 + 
 +# CONFIGURE HERE 
 + 
 +# select file extension: 
 +EXT_OLD=".flac" 
 +EXT_NEW=".oga" 
 + 
 +# select directory for new vfiles 
 +OUT_DIR="./oggs/" 
 + 
 +# add -vorbis parameter to sndfile-convert call 
 +CONVERT_OPT="-vorbis" 
 + 
 + 
 +# CODE START 
 + 
 +mkdir -p "$OUT_DIR" 
 + 
 +# apply to all flac files in current directory 
 +FILES=*${EXT_OLD} 
 + 
 +for f in $FILES 
 +do 
 + 
 +  fn=`basename "$f" $EXT_OLD` 
 +  fn="${OUT_DIR}${fn}${EXT_NEW}" 
 +   
 +  comm="sndfile-convert $CONVERT_OPT $f $fn " 
 +  echo "--> $comm " 
 +  $comm 
 +  echo "" 
 + 
 +done 
 + 
 + 
 + 
 + 
 +</code> 
 +\\ 
 +\\ 
 +<code> 
 +# There is a possilbe alternative, with "find" and -exec statement 
 +
 +# warning: this is not verbose  and  can take some time ! 
 + 
 + 
 +# for all files in current directory (.)  execute libsndfile-convert 
 +
 +find . -name "*.flac" -exec sndfile-convert -vorbis '{}' '{}'.oga \; 
 + 
 +</code>
  
 . .
Line 195: Line 316:
 . .
  
-==== Tips ==== 
  
 +==== Extract Audio from Video and recombine ====
 +(help by Robin Gareus @lau-ml)
  
-=== use a proper python shell ===+=== with ffmpeg ===
  
-(by Torben Hohn, 28. September 2010 01:16 )+<code>
  
 +#extract audio
 +ffmpeg -i orig_video.wmv audio_out.wav
 +
 +#replace audio
 +ffmpeg \
 + -i orig_video.wmv \
 + -i new_audio.wav \
 + -vcodec copy \
 + -map 0.0 -map 1.0 \
 + new_video.wmv
 +
 +</code>
 +
 +
 +<code>
 +Details:  The "map" may be different depending on the .wmv file.
 +run `ffprobe` to see which is the video-track in the .wmv file
 +usually this is "0.0".
 +   Stream #0.0: Video:...
 +   Stream #0.1: Audio: ..
 +and "1.0" corresponds to the 2nd input file - your new audio.
 +
 +You may want to add "-acodec wmav2" and "-ar 128k" options for 128kbit/s
 +Windows Media Audio 2 or whatever audio-codec/quality your want. `ffmpeg
 +-codecs | grep "EA"` gives you a list of available codecs for Encoding
 +Audio.
 +
 +</code>
 +
 +
 +BTW. Ardour3 with videotimeline patch can do all this for you.
 +import,extract,re-encode using ffmpeg.
 +
 +
 +
 +>> Thanks. It is 0:0 and 0:1 and -b:a=192k I found, but I have some sync problems after recombining tho. Any other ideas?
 +
 +My gut feeling is to blame ffmpeg's WMV muxer (it may not be able to mux
 +a bit-exact copy of the original video with your new soundtrack).
 +
 +<code>
 +
 +Try using '-sameq' instead of '-vcodec copy' (re-encode the video with
 +same quality rather than a bit-exact copy - this often solves muxing
 +issues but will cause a small loss of either video quality or increased
 +bandwidth).
 +
 +</code>
 +
 +and also try a different output format eg. 'new_video.avi' or '..mov'
 +instead of 'new_video.wmv'.
 +
 +<code>
 +
 +you may need both, this should work:
 + 'ffmpeg -i vid.wmv -i aud.wav -sameq -map 0.0 -map 1.0 output.avi'
 +
 +</code>
 +
 +\\
 +
 +=== with mencoder ===
 +
 +[[http://savvyadmin.com/extract-audio-from-video-files-to-wav-using-mplayer/]]
 +
 +\\
 +
 +=== posssibly other options ===
 +
 +\\
 +  * kdenlive
 +  * ardour3 + video patch
 +
 +\\
 +\\
 +
 +
 +==== JACKdbus - Desktop integration - backend-switching ====
 +  * [[http://gareus.org/blog/jack2dbus| jack2 backend switching ]]
 +  * [[http://gareus.org/wiki/jack2contol|jack2 dbus control ]]
 +
 +\\
 +\\
 +
 +==== save and restore irq process priorities ====
 +\\
 +<code bash>
 +
 +#!/bin/bash
 +#
 +# rtirq_power: save and restore irq process priorities
 +#
 +# This script is called when a change in power status happens, when
 +# suspending it saves a list of all irq process priorities, when
 +# resuming it changes the priorities of the proper irq processes
 +# to the saved values
 +#
 +# Copyright (c) 2012 Fernando Lopez-Lezcano
 +#
 +#   This program is free software; you can redistribute it and/or
 +#   modify it under the terms of the GNU General Public License
 +#   as published by the Free Software Foundation; either version 2
 +#   of the License, or (at your option) any later version.
 +#
 +#   This program is distributed in the hope that it will be useful,
 +#   but WITHOUT ANY WARRANTY; without even the implied warranty of
 +#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 +#   GNU General Public License for more details.
 +#
 +#   You should have received a copy of the GNU General Public License along
 +#   with this program; if not, write to the Free Software Foundation, Inc.,
 +#   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 +
 +. "${PM_FUNCTIONS}"
 +
 +case $1 in
 +    hibernate|suspend)
 + /bin/ps -eo rtprio=,comm= --sort -rtprio | /bin/egrep ' irq/[0-9]*' | savestate rtirq
 +        ;;
 +    thaw|resume)
 + restorestate rtirq | while read IRQPRIO IRQCOMM ; do
 +     if [ -n "${IRQPRIO}" -a -n "${IRQCOMM}" ] ; then
 + IRQPID=`/bin/ps -e -o pid,comm | grep " ${IRQCOMM}" | awk '{print $1}'`
 + if [ -n "${IRQPID}" ] ; then
 +     PRIO=`/bin/ps -p ${IRQPID} -o rtprio=`
 +     if [ ${PRIO} -ne ${IRQPRIO} ] ; then
 + /usr/bin/chrt -f -p ${IRQPRIO} ${IRQPID}
 +     fi
 + fi
 +     fi
 + done
 +        ;;
 +    *) exit $NA
 +        ;;
 +esac
 +
 +
 +</code>
 +
 +\\
 +.
 +
 +<quote>
 +
 +A first try at using a pm-utils script. This script saves the priority state of all irq* processes and restores them after a resume. It only restores the priority for processes that still exist after the resume, and will do nothing for new processes (ie: you plugin a usb card while the computer is sleeping). That would be taken care by my previously posted udev script which would change priority of newly inserted soundcards. I put 05rtirq it in /etc/pm/sleep.d/ directory... it seems to be working fine in my laptop.
 +
 +</quote>
 +\\
 +\\
 +\\
 +\\
 +
 +
 +
 +\\
 +
 +
 +===== Tips =====
 +
 +\\
 +
 +==== use a proper python shell ====
 +\\
 +(by Torben Hohn, 28. September 2010 01:16 )
 +\\
 ipython is there for quite some time. ipython is there for quite some time.
  
 and i recently discovered bpython and i recently discovered bpython
  
-[[http://ipython.scipy.org/moin/]]+  * [[http://ipython.scipy.org/moin/]]
  
-[[http://bpython-interpreter.org/]]+  * [[http://bpython-interpreter.org/]]
  
 this is where the fun starts this is where the fun starts
Line 215: Line 502:
  
 doctests also pretty much kick ass. doctests also pretty much kick ass.
 +\\
 [[http://docs.python.org/library/doctest.html]] [[http://docs.python.org/library/doctest.html]]
 +
 +
 +\\
 +\\
 +
 +
 +==== Tip: Pianoteq - software synth - on Linux ====
 +\\
 +(tip by: Edward Diehl, LAD, 2012-09-02)
 +\\
 +I wanted to mention that Pianoteq does provide a linux VST which does
 +work in Ardour and Qtractor.  However, the default version provides 5
 +output channels which Ardour does not seem to like (because it expects
 +stereo output).  However, if you append "_2chan" to the plugin library
 +name (e.g. Pianoteq.so to Pianoteq_2chan.so) , the plugin will output
 +only 2 channels and work happily in Ardour.
 +\\
 +\\
 +
  
  
wiki/scripts_and_tools.1309449468.txt.gz · Last modified: 2011/06/30 17:57 by emrum