This is an old revision of the document!
Table of Contents
rme babyface
General
The RME Babyface is a USB 2.0 interface with
- 10 Input / 12 Output channels
- 2 x Analog Input
- 4 x Analog Output
- 1 x ADAT I/O or 1 x SPDIF I/O optical
- 1 x MIDI I/O
- 1 x USB 2.0
- 2 x Mic Preamp with digitally controlled gain
- 1 x Hi-Z instrument input
- TotalMix FX (with EQ via internal DSP, Reverb, Echo).
Support
Class compliant via new firmware (version 200). In CC (Class Compliant) mode the Babyface should work out of the box without having to use a patched kernel. This is contrary to the Fireface UCX, with which the Babyface shares its internals, which does need a patch 1).
TotalMix and the internal DSP can't be used in CC (Class Compliant) mode so these options are not available when using the Babyface with Linux.
References
- RME forum on new firmware November 2012