PageDescriptionRelease DateTags
Midiman/Tascam Firmware Loaderfor MidiSport USB MIDI interfaces and Tascam USB Audio interfaces 
USBUA100OSS (not ALSA) device driver and console program for the Roland UA-100 
RME BabyfaceGeneral The RME Babyface is an USB 2.0 interface with: * 2 x Analog Input * 4 x Analog Output (including headphone channels) * 10 Input / 12 Output channels (including ADAT channels) * 1 x ADAT I/O or 1 x SPDIF I/O optical * 1 x MIDI I/O * 1 x USB 2.0 * 2 x Mic Preamp with digitally controlled gain * 1 x Hi-Z instrument input * TotalMix FX (with EQ via internal DSP, Reverb, Echo). 
focusrite scarlettUSB Audio/MIDI, Audio Interface, Hardware + Linux Focusrite Scarlett 2i2 worked out of the box with my Xubuntu 12.04. Even after many hours of continuous operation there are no instabilities, cyloning or distortions. Very reliable. It works ok up to 96 kHz with JACK. 
Raspberry Pi and realtime, low-latency audioThe Raspberry Pi can be set up to handle realtime, low-latency audio but it requires quite some tweaking. Hence this Wiki article in which some common bottlenecks as well as some possible optimizations will be described. Last but not least this article will explain how to get JACK aka jackd running on your RPi. 
samson c01uThe Samson C01U USB Studio Condenser is a microphone to connect directly with your PC. From the product page: Plug in and start recording. No extra gear needed! * Plug in and start recording. No extra gear needed! * Everything you need for recording audio on a computer * 16-Bit resolution, 44.1-48kHz sampling * Cardioid pickup pattern * Large 19mm diaphragm * Smooth, flat frequency response * Includes desktop mic stand, mic clip, USB cable and carry pouch 
apps/categories/usb_audio_midi.txt · Last modified: 2007/02/25 16:56 (external edit)